Other Specialty Engine Tools
Hose Removal Tool $14.70
Product Overview
Removes both popular sizes on fuel tank and carb
Pushes hose off barb fitting instead of tightening it on when pulling it
Specifications
- Zinc plate steel HD
Model
Description
Price
Flywheel Puller/Flywheel Holding Tool $40.00
Product Overview
Tool for pulling flywheels from "NEW" type 9TP702 Briggs & Stratton engines.
Image of flywheel pulling tool in use
Another image of flywheel pulling tool in use
Features
- Will also work with other engine flywheels that have two holes.
- will remove all B&S flywheels in production now
- Use for torquing flywheel nuts on Type 9TP702 engines
Specifications
- Zinc plate steel Construction
Model
Description
Price
Oil Pressure Gauge Set $45.00
Product Overview
Oil Pressure Gauge Set fits 1/8 in pipe thread tap port
Features
- Includes an adapter for the oil filter for engines without 1/8
Model
Description
Price
Right Angle Swivel $25.00
Product Overview
Right angle swivel for large Schrader fitting. For fuel pressure tap.
Model
Description
Price
Alcohol Content Tester $3.50
Product Overview
Measure alcohol content of gasoline.
Features
- Simple test requires only water.
- Also known as DTT2603.
Specifications
Model
Description
Price
Alcohol Content Tester (3 pcs) $10.00
Model
Description
Price
Filter Cutter $28.00
Product Overview
Cutter to open a used oil filter for examination.
Features
- 2 inch to 6 inch diameter
- use with a filter wrench to turn the filter
Specifications
- Aluminum Construction
Model
Description
Price
DC Shunt $25.00
Product Overview
Use DC shunt to measure battery current flow.
Features
- Direct reading Millivolts to AMPs
Specifications
- Stainless Steel construction
- Meter not included
- Place female connection on one battery post, connect cable to male connection
Model
Description
Price
Dial Calipher $28.00
Product Overview
Precision instrument, does internal and external measurements
Features
- 0-6 inch range
- .001 graduations
Specifications
- stainless steel construction
Model
Description
Price
Pressure / Vac Pump $73.00
Product Overview
Pressure/Vac Pump up to 15 psi
Features
- Pressure/Vac pump for use in crankcase vacuum & pressure tests/leakdown tests.
Specifications
- For Tanaka and other engines.
Model
Description
Price
Leak Down Tester $105.00
Product Overview
Cylinder Leakage Tester Instructions
Features
- Low pressure = 35 psi the
- Ball-valve equipped for gradual pressure insertion into an engine to safely check if engine is positioned at top dead center for the leakdown test.
- Ships with crankshaft holding tool for use with small lawnmovers
Model
Description
Price
Fuel Pressure Gauge Set $48.00
Features
- 0-100 psi 2 1/2 inch diameter gauge
- Pressure bleed-off valve and hose set
Model
Description
Price
Compression Tester $40.00
Features
- 0-300 psi 2 1/2 inch diameter gauge
- Quick-disconnect hose set
- Diesel available 1000 psi call for quote
Model
Description
Price
